Map A Feature To A Device - Safran WR-ZEN Series User Manual

8.1 Licenses
8.1.4.1

Map a feature to a device

The user must first navigate to the tab Devices > Devices.
Figure 8-2: Devices Management in License Portal.
Then, click on the corresponding device to map the new feature. If this
device does not appear in the list, first create it (See the following section,
Create a New Device).
Once inside the corresponding device, click on Action > Map Entitlements
to perform the association.
This panel (Figure 8:3) allows to map any purchased licenses to this specific
device. The user only needs to specify the quantity of a given feature
license to associate to the device and save it.
Mapping Purchased Licenses to Device.
At this point the license(s) is(are) associated but still not generated yet. By
clicking on the Action > Download Capability Response a license file (.bin)
will be automatically generated and downloaded. After refreshing the
screen, the corresponding Status should be updated to License generated.
CHAPTER •
169
8 WR-ZEN Series User Manual Rev. v5.1