Network Configuration From Web - Safran WR-ZEN Series User Manual

4.3 The Web GUI
Figure 4-3:
The web session will automatically terminate after 15 minutes of inactivity. This
setting can be disabled or configured in Administration > Security > Web.
4.3.1

Network configuration from web

To illustrate how the user should interact with the web interface, an example of
the configuration of a static IP for eth0 network interface follows.
1.
50
The General Status Panel contains at- a- glance sync status and system
status information.
The System Status Panel contains metrics related to system functionality
(temperature, memory used, etc.) and contains a link to the overview page
for system status information.
The Versions Status Panel lists your current hardware version, serial num-
ber, and software version.
The Network Status Panel details the IP address information for each port.
Web GUI Dashboard sections
After logging in to the unit, select the Administration drop- down in the
Main Navigation bar, and then select the Network page:
Figure 4-4: Web GUI Network Page Navigation
CHAPTER •
4 WR-ZEN Series User Manual Rev. v5.1