Table 5-3: Ptp Information For A Port Interface - Safran WR-ZEN Series User Manual

5.4 IEEE 1588-2008 (PTPv2)
Figure 5-16:
Table 5-3:
OID
19.xx12.x
19.xx12.2
19.xx12.15
19.xx12.26
96
PTP Overview Menu
PTP information for a port interface
Name
net/<iface>/1/info
Port State <Enum>
0. None
1. Initializing
2. Faulty
3. Disabled
4. Listening
5. Pre-Master
6. Master
7. Passive
8. Uncalibrated
9. Slave
Sync Mode <Enum>
0. Two Step
1. One Step
2. Disabled
Rx Sync Packets <Integer>
Value Type
Information on the cor-
responding <iface> port
instance
Current state of the port that changes
according to the PTP protocol events.
• If this port is configured as a timing
source, it can be Slave (active) or
Passive (only handle announce mes-
sages) à Color: Blue.
• The port state is Disabled when the
link is down or when the port has
been configured with WR instead of
PTP.
• The port state will be Master if it dis-
tributes PTP timing (Color: Purple).
Finally, the other states are transition
states (mainly used by BMCA) or
error states.
Reports the current mode of oper-
ation received from the master. We
currently only support Two Step PTP.
Number of received sync messages
(Incrementing for Slave instances)
CHAPTER •
5 WR-ZEN Series User Manual Rev. v5.1
Description
.