Ptp License Management; Configuration - Safran WR-ZEN Series User Manual

Offset correction
Servo Fit Algorithm
5.4.1.1

PTP license management

All the topics related to PTP license management such as purchasing, activating
and checking are explained within the Licenses section
Once the license is activated (see image below) the web interface should allow
the user to configure these settings as explained in
Figure 5-14:
5.4.2

Configuration

CHAPTER •
5 WR-ZEN Series User Manual Rev. v5.1
PTP
Any number (in nanoseconds)
Normal, Soft, Hard, Hardx2
Unlicensed VS Licensed PTP daemon
Note: The CLI tool allows to modify and save all the parameters lis-
ted in "IEEE 1588 configuration with/without license" on the pre-
vious page even without license. However, they will not be
Applied/Loaded until the PTP license is validated.
Note: Master/Slave port configuration: The role of the port is given
by the Preset ("Presets" on
from the PTPv2 configuration tab. The section
should be read in case the user needs to modify the role for a spe-
cific port.
Note: PTP provides many options to support a wide range of applic-
ations. Then, the PTP profiles restrain some specific settings in order
to limit compatibility to only a subset of PTP. The user should thus
consider these restrictions when configuring PTP for a specific pro-
file.
With License
"Configuration"
page 71) and cannot be modified directly
5.4 IEEE 1588-2008 (PTPv2)
Without License
0
Normal
("Licenses" on page 166).
below.
"Custom" on page 76
89