Timing Source Info - Safran WR-ZEN Series User Manual

5.2.3

Timing source info

Each timing source shares a common set of values processed by the strategy in
order to decide how to discipline the virtual clock of the device.
By navigating to Overview > Timing Overview the user will be able to quickly
understand the state of all timing sources.The figure below shows the parameters
related to the primary (#1) timing source.
Figure 5-9:
The parameters contained in the previous table are described as follows:
3.13x0.x
3.13x0.1
3.13x0.2
CHAPTER •
5 WR-ZEN Series User Manual Rev. v5.1
Note: This reference topology is a simplified version of a real timing
network and the proposed structure in layers might not be respec-
ted: A last-hop device could be connected directly to the GM or an
external GNSS reference could be used as backup in the fan-out-
/interoperability layer.
Note: Some devices in the reference topology strategically include
the holdover option (HO) to ensure continuous operation even if not
locked to any timing sources. This option is automatically enabled if
detected and the provided presets can be used without any modi-
fications.
Timing Sources Overview panel
OID Name
tsrc_info/x/xxx
Name <String> (i.e.,
wr0, front-
panel, eth1, etc.)
Type GM
WR
PTP
HO/FR
Value
Information about the x timing source.
Name of the corresponding timing source.
Type of timing source, each type can have slightly
different state machines to properly handle its tim-
ing source.
5.2 General Timing Management
Description
81