General Configuration - Safran WR-ZEN Series User Manual

13.3X10.1
13.3X10.2
13.3X10.3
13.3X10.4
13.3X10.5
7.2.1.1

General configuration

To configure SNMP via the Web GUI, log in to the device and navigate to Admin-
istration > SNMP.
In order to configure SNMP from the CLI, the wrz_config tool must be accessed.
Once it has been launched, the SNMP configuration is under Management >
SNMP.
CHAPTER •
7 WR-ZEN Series User Manual Rev. v5.1
Caution: Access mode configuration: For security reasons, it is not
recommended to provide read/write permissions while using SNMP
v1 or v2.
3. v3: Parameters for SNMP v3 users and passwords (see table below).
OID Name
User name
Access view
Access mode
Auth
Priv
Value Type
<String> (i.e., userSNMP)
<Enum>
• none.
• basic
• extended
• all
<Enum>
• ro: Read only.
• rw: Read/write
<Enum>
•
• SHA
<Enum>
•
• AES
7.2 SNMP
Description
Name of the
SNMPv3 user.
Access view
options.
• none: Disable
SNMP v1 and v2.
• basic: Show
basic SNMP
information.
• extended:
Show extended
SNMP inform-
ation.
• all: Show all
the SNMP
information
Access mode
options.
Authentication
encryption pro-
MD5
tocol.
Privacy encryp-
tion protocol.
DES
131