7.4 Healthing
7.4
Healthing
The healthing module provides general information about the system health for
monitoring purposes. This includes information about the fans, power supplies,
memories, or temperature between others.
7.4.1
Information/Overview
The associated parameters can be accessed through the Web GUI or the com-
mand line. The Web GUI has three Healthing pages, located under Overview >
Healthing.
The Healthing System Overview page provides all necessary information on tem-
perature, computer usage, etc.:
144
Oct 18 13:05:25 zen-303 lldpd[4007]: protocol LLDP enabled
Oct 18 13:05:25 zen-303 lldpd[4007]: protocol CDPv1 disabled
Oct 18 13:05:25 zen-303 lldpd[4007]: protocol CDPv2 disabled
Oct 18 13:05:25 zen-303 lldpd[4007]: protocol SONMP disabled
Oct 18 13:05:25 zen-303 lldpd[4007]: protocol EDP disabled
Oct 18 13:05:25 zen-303 lldpd[4007]: protocol FDP disabled
Oct 18 13:05:25 zen-303 lldpd[4007]: libevent 2.1.12-stable ini-
tialized with epoll method
Oct 18 13:05:25 zen-303 lldpd[4007]: enable SNMP subagent
Oct 18 13:05:25 zen-303 lldpd[4007]: NET-SNMP version 5.9 AgentX
subagent connected
Oct 18 13:05:26 zen-303 lldpcli[4008]: lldpd should resume
operations
Oct 18 13:05:26 zen-303 root: /wr/bin/lldp-agent 2>&1 | logger &
Oct 18 13:05:35 zen-303 root: lldp#W: lldp_log_event_action:43:
Synchronization status change -> status Locked, MAC 64:f-
b:81:20:1d:ee, Device wrztpB-494
CHAPTER
•
7
WR-ZEN Series User Manual Rev. v5.1