Table 5-4: Advanced Ptp Information For A Port Instance - Safran WR-ZEN Series User Manual

19.xx12.31
19.xx12.28
19.xx12.33
19.xx12.64
19.xx12.67
Then if a specific interface is not disabled (Port State ≠ None), by clicling on the
(+) a user will expand the interface to its Advanced View to get more information
about the PTP exchange. The bi- directional exchanges of PTP is resumed in
"IEEE 1588-2008 (PTPv2)" on
type of messages is provided by the parameters in advanced view (see the table
below).
Table 5-4:
19.xx12.x
19.xx12.2
19.xx12.3
19.xx12.26
19.xx12.28
CHAPTER •
5 WR-ZEN Series User Manual Rev. v5.1
OID Name
Tx Sync Packets
Rx DelayReq Pack-
ets
Tx DelayReq Pack-
ets
Rx PeerDelayReq
Packets
Tx PeerDelayReq
Packets
Advanced PTP information for a port instance
net/<iface>/1/info
Offset from Master
One-Way Delay
Rx Sync Packets
Rx DelayReq Packets
Value Type
<Integer> Number of transmitted sync mes-
sages (Incrementing for Master
instances)
<Integer> Number of received delay request
message (Incrementing for Master
instances)
<Integer> Number of received delay request
message (Incrementing for Slave
instances)
<Integer> Number of received peer delay
request messages (Incrementing for
Slave instances when a PTP exchange
is completed)
<Integer> Number of transmitted peer delay
request messages (Incrementing for
Slave instances when a PTP exchange
is completed)
page 88, where the number of packets for each
<Decimal> (f64)
<Decimal> (f64)
<Integer>
<Integer>
5.4 IEEE 1588-2008 (PTPv2)
Description
Information on the cor-
responding <iface> port
instance
.
The value represents the actual
offset (in seconds) between mas-
ter and slave. It is calculated from
the retrieved timestamps with
corrections from calibrations &
asymmetries settings.
One-way path delay in seconds
(equivalent to delay_MS)
Number of received sync mes-
sages (Incrementing for Slave
instances)
Number of received delay
request message (Incrementing
for Master instances)
97