Configuration - Safran WR-ZEN Series User Manual

7.4 Healthing
OID
0.91x0
0.9110.1
0.9110.1
0.9110.1
0.9110.1
0.9110.1
0.9110.1
0.91x0
0.92x0.1
0.92x0.2
7.4.2

Configuration

There are a few parameters that can be configured. In the CLI, these parameters
are configured via the Healthing module:
148
Name
pws/pwsX/
Status <Enum> (i.e., OK)
Temperature <Decimal> (i.e., 41 ºC)
Voltage In <Decimal> (i.e., 233.250000 V)
Voltage Out <Decimal> (i.e., 11.949219 V)
Power In <Decimal> (i.e., 30.000000 W)
Power Out <Decimal> (i.e., 24.000000 W)
fan/fanX
/
Status Front <Enum>
0. OK
1. Unplugged
2. Stopped
3. I2C Error
Status Back <Enum> 0. OK 1. Unplugged 2. Stopped I2C
Error
Value Type
CHAPTER •
7 WR-ZEN Series User Manual Rev. v5.1
Description
Information
related to
pwsX where
pwsl (0.9100)
corresponds
to the left
power supply
and pwsr
(0.9120) cor-
responds to
the right
power sup-
ply.
Power supply
status.
Power supply
temperature.
Power supply
input voltage.
Power supply
output voltage.
Consumption of
the power sup-
ply input power.
Consumption of
the supply out-
put power.
Information
related to the
module fanX.
(Where OID
9210à fan0,
9220à fan1)
Status of the
front ventilator
of fanX module.
Status of the
back ventilator
of fanX module.