Trap Notifications - Safran WR-ZEN Series User Manual

7.2 SNMP
The best way to review our traps definitions is read trap section in SEVEN-
PRODUCT- MIB.txt file. You can find this file inside your device at /wr/etc/s-
nmp/SEVEN-PRODUCT-MIB.txt.
7.2.2.2

Trap notifications

There are different events that trigger the generation of a trap in the device
including startup, shutdown, module open or close and parameter status.
136
wrzTrapTime: Contains the time information when the trap was sent.
wrzTrapPrmOID: Contains the OID information of the parameter associated
to the generated trap.
wrzTrapPrmKey: Contains the full path parameter key associated to the
generated trap.
wrzTrapPrmVal: Contains the value of the parameter that generated the
trap as a number.
wrzTrapPrmValStr: Contains the value of the parameter that generated the
trap as a string if existing.
wrzTrapModOID: Contains the OID information of the module associated to
the generated trap.
wrzTrapModKey: Contains the module name associated to the generated
trap.
wrzInit: Trap generated when the system completely starts, and all services
are initialized.
wrzShutdown: Trap generated when all services are closed before a system
shut down or reboot.
modOpen: Trap generated when a module or service is launched.
ModClose: Trap generated when a module or service is closed.
okagainParam: Trap generated when a parameter comes back to a correct
status after an alert condition.
warningParam: Trap generated when a parameter changes to a warning
status.
criticalParam: Trap generated when a parameter changes to a critical
status.
outofrangeParam: Trap generated when a parameter goes to an out of
range value.
TrackedParam: Trap generated when a tracked parameter changes its
value.
CHAPTER •
7 WR-ZEN Series User Manual Rev. v5.1