Health General Status - Safran WR-ZEN Series User Manual

APPENDIX
9.2.2

Health general status

In order to check the device general status, there are multiple alternatives:
1. SSH/UART
2. Web interface
3. SNMP queries
SSH / mini-USB UART
If you connect to the device via SSH/UART you will be able to check the WR-
ZEN6 sync status by typing:
gpa_ctrl healthingd
gpa_ctrl tmgrd vclock/info/
The WR-ZEN web interface
You can access the WR-ZEN graphical interface by setting the device an IP and
copying its address into the browser's URL bar.
General ports, mode and other configuration can be consulted or changed in the
web.
SNMP.
This is the recommended alternative for monitoring purposes. Follow the steps
on the attached Monitoring Tools User Guide to get SNMP working.
You will be able to both consulting or changing configurations on the WR-ZEN
with the SNMP commands.
After having installed SNMP on your host, all parameters on the WR-ZEN can be
checked by typing:
184
How can you confirm that external PPS/10 MHz signals are being detec-
ted?
At the WR-ZEN's console, type:
root@zen- 425:~#
PPS & CLK
The expected output is PPS &CLK which means that both signals are detec-
ted.
gpa_ ctrl hald /spll/ext/fpanel/detected
WR-ZEN Series User Manual