Table 4-2: Information Related To The Network Interface - Safran WR-ZEN Series User Manual

4.1 Parameters API Introduction
OID
0.xxx0.3
0.xxx0.4
0.xxx0.5
The next table corresponds to the parameters that provide information (read-
only) about the corresponding interface:
Table 4-2:
OID
1.xxx0.x
0.xxx0.1
0.xxx0.2
0.xxx0.8
0.xxx0.9
0.xxx0.10
0.xxx0.11
0.xxx0.12
0.xxx0.13
0.xxx0.14
36
Value
Name
Type
IPv4 <Array> [4
Address x u8]
IPv4 Net- <Array> [4
mask x u8]
IPv4 Gate- <Array> [4
way x u8]
Information related to the network interface
Name Value Type
/net/<iface>/xxx
Status <Enum>
0. Link
Down
1. Link Up
2. Not
Found
Ethernet <Array> [6
Address x u8]
Speed <String>
Tx Packets <Integer>
(u32)
Rx Packets <Integer>
(u32)
Tx Bytes <Integer>
(u32)
Rx Bytes <Integer>
(u32
Tx Errors <Integer>
(u32)
Rx Errors <Integer>
(u32
Description
IPv4 address of <iface> (format: [0-255].[0-255].[0-
255].[0-255]).
Subnet mask.of <iface> (format: [0-255].[0-255].[0-
255].[0-255]).
Default gateway for <iface> (format: [0-255].[0-255].
[0-255].[0-255]).
Description
Directory related to the <iface> name where
OIDs follow the given pattern: wr0 → 201x,
wr1 → 211x, ..., wr15 → 351x & eth0 → 680x,
eth1 → 690x.
Status of the interface.
MAC address of the corresponding interface with
upper case hexadecimal format (e.g.,
64:FB:81:20:84:06).
Auto-negotiated speed of <iface>.
Transmitted packets on <iface>.
Received packets on <iface>.
Transmitted bytes on <iface>.
Received bytes on <iface>.
Transmission errors on <iface>.
Reception errors on <iface>.
CHAPTER •
4 WR-ZEN Series User Manual Rev. v5.1