Firmware Update; Hardware Version And Firmware - Safran WR-ZEN Series User Manual

8.2

Firmware Update

There are two different ways to update the software and firmware of the device:
through the web interface or by using SSH/SCP.
8.2.1

Hardware version and firmware

The HW version is displayed on the dashboard page in the Versions overview
panel. The device below is a WR-ZEN TP that mounts a ZENv3.3 as main board.
Figure 8-4:
The WR-ZEN TP can be updated using the firmware that matches the version of
the main board, or the new generic family firmware developed from the 3.4 soft-
ware version:
But not the one that correspond to another device:
Or the one that corresponds to another hardware version
CHAPTER •
8 WR-ZEN Series User Manual Rev. v5.1
Note: Matching device hardware: Safrans distributes different WRZ-
OS firmwares according to the hardware family of the device. The
user must follow indications provided in
ware" below to get the corresponding firmware before proceeding
to its update.
Caution: The configuration is NOT compatible between major ver-
sions. If the major version changes (for example from 3.X to 5.X or
vice-versa), the configuration on the device must be removed and
configured again.
HW version displayed in dashboard.
wr-zynq-os-v<XXX>-<YYYMMDD>-ZENx.x_binaries.tar
wr-zynq-os-v<XXX>-<YYYMMDD>-ZEN3.x_binaries.tar
wr-zynq-os-v<XXX>-<YYYMMDD>-ZEN_binaries.tar
wr-zynq-os-v<XXX>-<YYYMMDD>-Z16x.x_binaries.tar
8.2 Firmware Update
"Hardware version and firm-
173