List Of Supported Sfps - Safran WR-ZEN Series User Manual

A subnet can be used as IP address too:
client mynasnetwork {
ipaddr = 172.17.5.0/24
secret = sevensecret
}
The configuration
freeradius/3.0/users by using the following lines:
username Cleartext-Password := "userpassword"
[other-configs]
An example can be:
test-radius Cleartext-Password := "password"
9.10

List of supported SFPs

Information on the supported SFPs is shown in the following table. Although our
devices are compatible with other SFPs, the use of any SFP outside this list may
cause synchronization errors for which we are not responsible.
AXGE-1254-0531
AXGE-3454-0531
1000BASE-BX BiDi SFP
1550nm-TX/1490nm-RX
120km
1000BASE-BX BiDi SFP
1490nm-TX/1550nm-RX
120km
WR-ZEN Series User Manual
of the
Note: If your WR-ZEN unit has been used as the client, the password
must be configured for the root user. Registration of new users is
not allowed in this device so root is the only existing user.
Wavelength
Model
T1310/R1490
T1490/R1310
T1550/R1490
T1490/R1550
users can be done
Power
Media
(nm) (dBm)
SMF -9 ~ -3
SMF -9 ~ -3
SMF -1 ~ 4
SMF -1 ~ 4
APPENDIX
in the file
/etc/-
Sensitivity
Distance
(dBm)
-20 10km
-20 10km
<-31 120km
<-31 120km
205