Process Integrity Interval; Chassis Applicability; Pmspiesnmp Command Line; Snmp Pie Section Of Pms.ini - Intel NetStructure MPCMM0001 Software Instructions

Process Monitoring and Integrity
6.10.5

Process Integrity Interval

This is the interval in seconds between executions of the PIE.
Values: 0 - 65535, where 0 indicates that the PIE only gets executed once.
Default: 3600.
ProcessIntegrityInterval = 3600
6.10.6

Chassis Applicability

This is a list of chassis types on which this particular Pie should be run. The list is comma
delimited. Spaces are ignored. If this key is not present, then the Pie will run on all chassis.
Values: MPCHC0001, ZT5085, MPCHC5085, ZT5088, MPCHC5088, ZT5089, MPCHC5089,
ZT5090, MPCHC5090, ZT5091, MPCHC5091.
ChassisApplicability = MPCHC0001, ZT5085, MPCHC5085, ZT5088, MPCHC5088,
ZT5089, MPCHC5089, ZT5090, MPCHC5090, ZT5091, MPCHC5091
6.10.7

PmsPieSnmp Command Line

The command line usage of PmsPieSnmp is:
PmsPieSnmp [-f SuccessiveFailureNumber]
where:
-f : This is the number of allowed successive integrity failures before the PMS performs recovery
on the faulting process. PMS performs recovery on "this number + 1".
Values: 1 - 100. Default = 3
For Example
PmsPieSnmp
PmsPieSnmp -f2
PmsPieSnmp -f 2
6.10.8

SNMP PIE Section of pms.ini

[PmsPie176]
ProcessIntegrityExecutable = ./PmsPieSnmp -f2
UniqueID = 176
AdminState = 1
ProcessIntegrityInterval = 300
66 MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.