Intel NetStructure MPCMM0001 Software Instructions page 83

Table 25. Dataitem Keywords for All Locations Except Chassis and System (Sheet 3 of 4)
Dataitem
Retrieves and sets power
state of a blade.
Get: This is used to find out
the powered on/off or offline
state of a blade
Set: To reboot, shutdown and
turn on a blade
powerstate
If "reset" is used on CMM
location, the software will
check for redundancy and a
reset will only occur if a
redundant partner is
identified.
"PowerOff" is not supported
on the CMM location.
Used to find out if a particular
location is occupied or
present in the chassis. This
presence
can be blades or intelligent
entities like fan trays or
PEMs.
Get/Set the current power
presentpowerlevel
level of a FRU.
Returns the System Event
sel
Log of the specified location.
Get the EKeys that have
grantedboardekeys
been granted to the Board.
MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
Description Get/Set
Both
Get
Get
Get
Get
The Command Line Interface (CLI)
CLI Get Output
"<location>: <currentState> (Mx)"
where Mx is the ATCA-defined M state of
the location
"<location> is <presenceState>."
Where <presenceState> is
"present" - if the location is present
"not present" - if the location is not
present or the CMM can not
communicate with it.
"The FRU Power Level is <PwrLevel>
Consuming <WattageValue> Watts"
where
<PwrLevel> is the current power level of
the FRU in the range 1-20
<WattageValue> is the current power
draw in watts
Listing of the interpreted SEL log of the
location. The listing is of the format:
"<Entry1>\n\n<Entry2>..."
where <EntryM> is of the format:
<Timestamp in Linux date
format>\n\t<SensorName>\t<EventDescr
iption>
Base Interface Ekeys:
<EkeyList>
Fabric Interface EKeys:
<EkeyList>
Update Channel Interface EKeys:
<EkeyList>"
where <EkeyList> is a list of ekey
settings for the interface such as
Ekey1 : enabled
EKey2 : disbaled
EKey3 : no set
Valid Set Values
"Reset"
"PowerOff"
"PowerOn"
N/A
N/A
N/A
N/A
83