Intel NetStructure MPCMM0001 Software Instructions page 278

Chassis management module
Table of Contents

Advertisement

Example CLI Commands
Table 111. Example CLI Commands (Sheet 2 of 3)
Use Case
Query what LEDs are
supported by a FRU
Query the color
support of an LED1
on a FRU
Query the current
state of LED1 on a
FRU
Set LED1 on a FRU
to blink green, 900ms
off, 100ms on
Get a FRU's
supported power
levels
Query the CMM for
it's power budget
Query the shelf's
address/location
Set the shelf's
address/location
Query the FRU's
activation policy
Set the FRU
activation policy
Activate or
Deactivate the FRU
278
MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
CLI Command
cmmget -l blade5 -d ledproperties
cmmget -l blade5 -t led1 -d ledcolorprops
cmmget -l blade5 -t led1 -d ledstate
cmmset -l blade5 -t led1 -d ledstate -v
blink,900,100,green
cmmget -l blade5 -d powerlevels
cmmget -l cmm -d powerbudget
cmmget -l chassis -d location
cmmset -l chassis -d location -v "[location]"
cmmget -l bladeN -d fruactivationpolicy
cmmset -l bladeN -d fruactivationpolicy -v [0-1]
cmmset -l bladeN -d fruactivation -v [0-1]
Return
LED support information:
Blade5 has control of hsled, led1,
led2,
Blade5 support 0 user leds
Information on the colors supported
by an LED:
led1 supports red,green,amber
Default local control color is green
Default override color is red
Current LED state information:
led1 is in localcontrol mode
function is on
color is green
Success or failure
The FRU's steady state power
levels:
AdvancedTCA FRU Power Levels:
Power Level 1 = 152 watts
The shelf's power budget:
Shelf Power Budget Distribution:
Feed #1 = 1322 Watts
Feed #2 = 1322 Watts
Feed #3 = 1474 Watts
Feed #4 = 1474 Watts
The shelf address information:
Shelf Address: lab bench
Success or Failure
Information about whether the
"Locked Bit" is set or not:
"Blade11 activation locked bit is set.
If in M1 Blade 11 cannot transition
to M2 until unlocked"
or
"Blade11 activation locked bit is not
set. Blade11 can transition from M1
to M2"
Success or Failure
Success or Failure

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetStructure MPCMM0001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents