Value Parameter: -V; Sample Cli Operations; Generating A System Status Report - Intel NetStructure MPCMM0001 Software Instructions

Table 30. Dataitem Keywords Used with the Target Parameter (Sheet 4 of 4)
dataitem
Get/Set the field in the CDM
regarding the max external
available current. Only used
with the feedN target.
maxexternalavailable
e.g.
current
cmmget -l cmm -t feed1 -d
maxexternalavailablecurrent
See Section 7.7, "Power Feed
Targets" on page
Get the field in the CDM
regarding the max internal
available current. Only used
with the feedN target.
maxinternalcurrent e.g.
cmmget -l cmm -t feed1 -d
maxinternalcurrent
See Section 7.7, "Power Feed
Targets" on page
Get/Set the field in the CDM
regarding the max expected
operating voltage. Only used
with the feedN target.
minexpectedoperating
e.g.
voltage
cmmget -l cmm -t feed1 -d
minexpectedoperatingvoltage
See Section 7.7, "Power Feed
Targets" on page
8.4.6

Value Parameter: -v

The value parameter specifies the new value for a dataitem. This parameter is required for all
cmmset commands and is only used for cmmset commands. Valid value parameters are shown
in with their corresponding dataitems in the data item tables listed above.
8.4.7

Sample CLI Operations

Sample CLI Operations can be found in
8.5

Generating a System Status Report

The CLI includes an executable script (cmmdump) that is used to generate a system status report
for use in communicating system health and configuration information to technical support
personnel. This is useful in helping technical support successfully troubleshoot any issues that may
be affecting the system. Cmmdump outputs system information to the screen by default or to a file.
To send the output to a file use the following command:
cmmdump > [filename]
MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
Get/
Description
Set
Both
69.
Get
69.
Both
69.
Appendix A, "Example CLI
The Command Line Interface (CLI)
CLI Get Output
current in Amps with 1 decimal point
current in Amps with 1 decimal point
voltage value in string between -36
to -72v
Commands".
Valid Set Values
current in Amps with
1 decimal point.
N/A
voltage value in
string between -36
to -72v
97