Intel NetStructure MPCMM0001 Software Instructions page 92

The Command Line Interface (CLI)
Table 27. Dataitem Keywords for Cmm Location (Sheet 7 of 7)
dataitem
Used to request to reboot the
standbycmmreboot standby CMM from the active
CMM.
Get the power feed count for
that location. Determines
number of feed targets (i.e.,
feedcount
feed1) for that location. See
Section 7.7, "Power Feed
Targets" on page
Used to set the failover
failoveronredundancy
configuration flag
Used to set the direction of
synchronization for home
syncuserscripts
scripts when the CMM
versions differ.
Uset to get/set SNMP trap
snmptrapformat
format
Used to get/set the option if to
snmpsendunrecogniz send unrecognized events.
edevents Used only when
snmptrapformat is set to 1.
Used to get/set the option if to
send unrecognized events.
selformat
Used only when
snmptrapformat is set to 1.
Used to get/set the option if to
seldisplayunrecogniz display unrecognized events
edevents in SEL. Used only when
selformat is set to 1.
Used to query the current
temperaturelevel temperature level of the
fantray.
Table 28. Dataitem Keywords for System Location
dataitem
Used to query which
unhealthylocations locations have active health
events
Clear major alarm LED on
clearmajor
the active CMM.
Clear minor alarm LED on
clearminor
the active CMM.
92 MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
Get/
Description
Set
Set
Get
69.
Both
Both
Both
Both
Both
Both
Get
Get/
Description
Set
Get
Set
Set
CLI Get Output
N/A
Integer number
automatic, manual
"upgrade", "downgrade", "always",
"equal"
"1" - text
"2" -raw
"3"-text+raw
0 - don't send
1 - send
"0" - don't send
"1" - send
"0" - don't display
"1" - display
"Normal", "Minor", "Major", "Critical"
CLI Get Output
"Critical : CritList
Major : MajList
Minor : MinList"
where each list is a list of locations
having that level of health events
(space separated)
N/A
N/A
Valid Set Values
1 - Request to
reboot the standby
CMM
N/A
automatic, manual
upgrade,
downgrade, always,
equal
"1" - text
"2" - raw
"3" - text+raw
"0" - don't send
"1" - send
"0" - don't send
"1" - send
"0" - don't display
"1" - display
N/A
Valid Set Values
N/A
1 - Only accepts a
value of 1
1 - Only accepts a
value of 1