Intel NetStructure MPCMM0001 Software Instructions page 151

Table 65. CmmFruTable/cmmFruEntry (1.3.6.1.4.1.343.2.14.2.10.3.52.1)
OID
1 cmmFruNumber
3 cmmFruHotSwapState
4 cmmFruLedProperties
5 cmmFruPowerLevels
6 cmmFruPresentPowerLevel
7 cmmFRUActivation
8 cmmFRUActivationPolicy
9 cmmFRUControl
10 cmmFRUDeactivationPolicy
Table 66. CmmFruTargetTable (1.3.6.1.4.1.343.2.14.2.10.3.53.1)
OID
1 cmmFruNumber
2 cmmFruTarget
3 cmmFruLedColorProps
4 cmmFruLedState
Table 67. CmmPmsTable/cmmPmsEntry (1.3.6.1.4.1.343.2.14.2.10.3.54.1) (Sheet 1 of 2)
OID
1 cmmPmsTarget
2 cmmPmsAdminState
3 cmmPmsRecoveryAction
MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
Object Syntax
INTEGER
DisplayString read-only
DisplayString read-only
DisplayString read-only
DisplayString read-write
INTEGER
INTEGER
INTEGER
INTEGER
Object Syntax
INTEGER
DisplayString none
DisplayString read-only
DisplayString read-write
Object Syntax
INTEGER
DisplayString read-write
DisplayString read-write
Access
none index
Retrieve the hot swap state of the FRU
from the CMM's internally known hot
swap states. Returns M state number
(0-7)
Find out what LEDs the FRU supports.
Returns the power levels available for a
FRU and number of watts drawn by
each.
Get/Set the power level of an entity.
Get/Set the activation state to either
activate or deactivate the FRU. The
read-write
Deactivate is the same as a Graceful
Shutdown
Get/Set the locked bit of the activation
read-write
policy
"0" – Cold reset
"1" – Warm reset
write-only
"2" – Graceful reboot
"3" – Issue diag. Interrupt
Get /Set the locked bit of the
read-only
deactivation policy.
Access
none index 1
index 2
Finds out what colors are supported by
the LED.
Get/Set the FRU LED state.
Access Value
none index
The process administrative state defines if
monitoring of the process will be provided.
Possible values: 1-Unlocked, 2-Locked.
The process recovery action defines how a
faulty process will be recovered. Possible
values: 1-No Action, 2-Process Restart, 3-
Failover and Process Restart, 4 - Failover
and Reboot.
SNMP
Value
Value
151