Intel NetStructure MPCMM0001 Software Instructions page 84

The Command Line Interface (CLI)
Table 25. Dataitem Keywords for All Locations Except Chassis and System (Sheet 4 of 4)
Dataitem
Get a list of Bused EKeys
busedekeys
and who owns them.
Used to query the total
number of FRUs in a
particular location. Once the
number of FRUs for the
location is known, the FRU
totalfrus
can be specified by the
format "-l location:fru#". Not
specifying the ":fru#" part will
direct the command to FRU
ID 0
Get/Set the deactivation
policy of the FRU. In PICMG
3.0 ECN 1 this refers to the
deactivation locked bit. The
frudeactivationpolicy FRU can be specified by the
format "-l [location:fru#]. Not
specifying the ":fru#" will
direct the command to FRU
0.
ipmicommand
Used to list SEL in raw
rawsel
format.
84 MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
Description Get/Set
Get
Get
Both
Set
Get
CLI Get Output
Metallic Test Bus Pair #1:
Token Owned: Yes/No
Owner's IPMBAddress: IPMBAddress
Metallic Test Bus Pair #2:
Token Owned: Yes/No
Owner's IPMBAddress: IPMBAddress
Sync Clock Group #1:
Token Owned: Yes/No
Owner's IPMBAddress: IPMBAddress
Sync Clock Group #2:
Token Owned: Yes/No
Owner's IPMBAddress: IPMBAddress
Sync Clock Group #3:
Token Owned: Yes/No
Owner's IPMBAddress: IPMBAddress
where "Owner's IPMBAddress" is
displayed when "Token Owned" is set to
"Yes".
integer number
1 - Locked bit is set
0 - Locked bit is not set
Command Response string on success
or error code on failure.
"Listing of raw format SEL log of the
location. The listing is of the format:
<Entry1>\n\n<Entry2>...
Where :
<EntryM> is of the format: <Timestamp in
Linux date
format>\n\t<SensorName>\t<EventDescr
iption>"
Valid Set Values
N/A
N/A
1- Set the locked
bit
0 - Clear the
locked bit
Command request
string
N/A