Pinging Ipmi Controllers; Time To Delay And Number Of Attempts - Intel NetStructure MPCMM0001 Software Instructions

Power and Hot Swap Management
7.8

Pinging IPMI Controllers

The following lists the values of time to delay and number of pings that the CMM uses to
determine the state of a FRU.
Table 18. Time to Delay and Number of Attempts
DelayBetweenPingLoops
DelayBetweenIPMControllerPings
NumberFailedAttemptsBeforeAlert
70 MPCMM0001 Chassis Management Module Software Technical Product Specification
Download from Www.Somanuals.com. All Manuals Search And Download.
Variable
The number of microseconds to delay between
each ping loop. This is essentially the amount of
time from the ping of the last IPMI Controller in
the list to the ping of the first controller in the list.
The number of microseconds of delay between
the ping on one controller that is in the list and
the ping of the next one on the list. This delay
does not apply after the last controller in the list.
How many failed attempts to contact the IPMI
Controller must occur prior to raising an event
that communication has been lost.
Description Value
10000000
(10 seconds)
0
3