Notes On Ce Marking; Intended Use - MICRO-EPSILON capaNCDT 6240 Operating Instructions Manual

Safety
Avoid shocks and impacts to the sensor and controller.
> Damage to or destruction of the sensor and/or controller
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the sensor and/or controller
Protect the sensor cable against damage
> Destruction of the sensor
> Failure of the measuring device
1.3

Notes on CE Marking

The following apply to the capaNCDT 6240:
- EU directive 2014/30/EU
- EU directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant applicable harmonized Euro-
pean standards (EN). The measuring system is designed for use in industrial environments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authorities according to the EU
Directives.
1.4

Intended Use

- The capaNCDT 6240 measuring system is designed for use in industrial and laboratory applications. It is used for
ƒ displacement, distance, thickness and movement measurement
ƒ position measuring of parts or machine components
- The system must only be operated within the limits specified in the technical data.
The system must be used in such a way that no persons are endangered or machines and other material goods are damaged in
the event of malfunction or total failure of the system.
Take additional precautions for safety and damage prevention in case of safety-related applications.
capaNCDT 6240 Page 8