Notes On Ce Marking; Intended Use; Proper Environment - MICRO-EPSILON capaNCDT CST6110 Operating Instructions Manual

Safety
1.3

Notes on CE Marking

The following apply to the capaNCDT CST6110:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant applicable harmonized Europe-
an standards (EN). The measuring system is designed for use in industrial environments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authorities according to the EU
Directives
1.4

Intended Use

- The system is designed for use in industrial and laboratory applications.
- It is used for industrial counting tasks.
- The system must only be operated within the limits specified in the technical data, see Chap.
- The system must be used in such a way that no persons are endangered or machines and other material goods are damaged in
the event of malfunction or total failure of the sensor.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5

Proper Environment

- Protection class (sensor):
- Protection class (controller):
- Temperature range (operation)
ƒ Sensor, sensor cable:
ƒ Controller:
- Temperature range (storage)
ƒ Sensor, sensor cable:
ƒ Controller:
- Humidity:
- Ambient pressure:
- Power supply
capaNCDT CST6110
IP67 (when connected)
IP67 (with closed lid and when connected)
-50 ... +125 °C (-58 ... +257 °F)
-40 ... +85 °C (-40 ... +185 °F), briefly up to 125 °C
-50 ... +125 °C (-58 ... +257 °F)
-40 ... +85 °C (-40 ... +185 °F)
5–95% (non-condensing)
Atmospheric pressure
11 ... 32 VDC
2.4
Page 6