MICRO-EPSILON capaNCDT 6240 Operating Instructions Manual page 80

Appendix| Integration Into TIA Portal
Enter the device name for identification in the PN network.
Switch to Device view, double-click your DT6240/PNET and assign a (device) Name in the Inspector window (tab Prop-
erties > General).
i
This is one of several possibilities to change the device name.
Fig. 27 Assigning a device name
i
The device name is used to identify the device on the PN network and as an address; it must be unique across the entire sys-
tem.
capaNCDT 6240 Page 80