Enable The Enhanced Cooling Function; Fan Option; Fan Population Guidelines - HPE ProLiant DL180 Gen10 User Manual

11. Install the air baffle.
12. Install the access panel.
13. Install the server into the rack.
14. Connect all peripheral cables to the server.
15. Connect each power cord to the server.
16. Connect each power cord to the power source.
17. Power up the server.
18. If Intel Xeon Gold 6244 Processors are installed, enable the enhanced cooling function.
19. If removed, install the front bezel.
The installation is complete.

Enable the enhanced cooling function

The server generates more heat when Intel Xeon Gold 6244 Processor is installed. To maintain proper cooling, increase
the fan speed.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced
Options > Fan and Thermal Options > Thermal Configuration.
2. Select Enhanced CPU Cooling.
3. Save your setting.

Fan option

Fan population guidelines

The number of fans installed in the server determines fan redundancy.
Configuration
One processor without
rear 2-SFF drives
installed
One processor without
rear 2-SFF drives
installed
One processor with rear
2-SFF drives installed
Fan redundancy Bay 1
No Blank
Yes Blank
No Blank
Bay 2 Bay 3 Bay 4
Blank Blank Fan
Fan Blank Fan
Fan Fan Fan
Hardware options installation
Bay 5 Bay 6
Fan Fan
Fan Fan
Fan Fan
Table Continued
79