Enable The Increased Cooling Function; Power Supply Options; Hot-Plug Power Supply Calculations - HPE ProLiant ML110 Gen10 User Manual

7. Connect each power cord to the power source.
8. Power up the server.

9. Enable the increased cooling function.

The installation is complete.
Enable the increased cooling function
The server generates more heat when it is installed in a rack. To maintain proper cooling, increase the fan speed.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced
Options > Fan and Thermal Options > Thermal Configuration.
2. Select Increased Cooling
3. Save your setting.

Power supply options

Depending on the installed options and the regional location where the server was purchased, the server can be
configured with one of the following power supplies.

Hot-plug power supply calculations

For more information on the hot-plug power supply and calculators to determine server power consumption in various
system configurations, see the Hewlett Packard Enterprise Power Advisor website (https://www.hpe.com/info/
poweradvisor/online).
Hardware options installation
58