HPE ProLiant DL180 Gen10 User Manual page 93
Hide thumbs
Also See for ProLiant DL180 Gen10:
- Product end-of-life disassembly instructions (10 pages)
Table of Contents
Advertisement
•
Extend the server from the rack.
•
Remove the server from the rack.
6.
Remove the access panel.
7.
Remove the primary riser cage.
8.
Remove the Media Module adapter blank.
9.
Install the Media Module adapter:
a. Align the Media Module adapter to the opening on the rear panel.
b. Press the other end of the Media Module adapter down to connect on the system board.
c. Firmly seat the Media Module adapter in the connector and ensure that it is secured with the latch.
Hardware options installation
93
Advertisement
Table of Contents
