Hardware Options Installation; Introduction; Installing The Bezel And The Bezel Lock - HPE ProLiant DL180 Gen10 User Manual

Hardware options installation

This chapter provides detailed instructions on how to install hardware options.
For more information on supported options, see the product QuickSpecs on the website at:
http://www.hpe.com/info/qs
To view the warranty for your server and supported options, see Warranty information.

Introduction

Install any hardware options before initializing the server. If multiple options are being installed, read the installation
instructions for all the hardware options to identify similar steps and streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.

Installing the bezel and the bezel lock

Procedure
1. Install the bezel.
a. Attach the bezel to the right latch ear.
b. Press the latch on the bezel.
c. While pressing the latch, rotate the bezel to attach bezel to left latch ear.
2. Install the Kensington lock.
Hardware options installation
51