Installing The Operating System With Intelligent Provisioning; Installing Or Deploying An Operating System - HPE ProLiant DL180 Gen10 User Manual

For more information on using these installation methods, see the Hewlett Packard Enterprise website.

Installing the operating system with Intelligent Provisioning

Procedure
1. Connect the Ethernet cable between the network connector on the server and a network jack.
2. Press the Power On/Standby button.
3. During server POST, press F10.
4. Complete the initial Preferences and Registration portion of Intelligent Provisioning.
5. At the Start screen, click Configure and Install.
6. To finish the installation, follow the onscreen prompts. An Internet connection is required to update the firmware and
systems software.

Installing or deploying an operating system

Before installing an operating system, observe the following:
• Be sure to read the HPE UEFI requirements for ProLiant servers on the Hewlett Packard Enterprise website. If UEFI
requirements are not met, you might experience boot failures or other errors when installing the operating system.
• Update firmware before using the server for the first time, unless software or components require an older version. For
more information, see Keeping the system current.
For the latest information on supported operating systems, see the Hewlett Packard Enterprise website.
•
• The server does not ship with OS media. All system software and firmware is preloaded on the server.
50
Setup