Installing The Access Panel - HPE ProLiant DL180 Gen10 User Manual
Hide thumbs
Also See for ProLiant DL180 Gen10:
- Product end-of-life disassembly instructions (10 pages)
Table of Contents
Advertisement
Installing the access panel
Prerequisites
•
T-15 Torx screwdriver
•
All internal cables must be connected and secured with clips.
Procedure
1. Place the access panel on top of the server with the latch open.
Allow the panel to extend past the rear of the server approximately 1.25 cm (0.5 in).
2. Push down on the latch. The access panel slides to a closed position.
3. Tighten the security screw on the latch.
32
Operations
Advertisement
Table of Contents
