a. Disconnect all peripheral cables from the server.
b. Disconnect each power cord from the server.
3. Extend the server from the rack.
4. Remove the server from the rack.
For instructions on how to extend or remove the server from the rack, see the documentation that ships with the rack
rail system.
5. Place the server on a sturdy, level surface.
Releasing the cable management arm
Procedure
1. Remove the cable tie if installed.
2. Release the cable management arm and then swing the arm away from the rack.
Removing the bezel
Procedure
1. Remove the Kensington security lock.
2. Remove the front bezel.
30
Operations