Installing The Air Baffle - HPE ProLiant DL180 Gen10 User Manual
Hide thumbs
Also See for ProLiant DL180 Gen10:
- Product end-of-life disassembly instructions (10 pages)
Table of Contents
Advertisement
6. Remove the access panel.
7. If the 12G SAS expander is installed, remove the riser cage.
8. Remove the air baffle.
Installing the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot blanks, or
blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure
1. Install the air baffle.
2. If removed, install the riser cage.
38
Operations
Advertisement
Table of Contents
