Table of Contents
Advertisement
Automatic Route Selection (ARS)
Setting Up Time Maps
Changing a Maps Day Types
Changing the Generic Week
Programming Manual
INDeX 9.1
ARS uses time maps for its time analysis processes. The INDeX maintains four
different time maps, each consisting of day types, a generic week plan and a month
plan.
The time map uses a week plan constructed out of the day types. Each map has 6
day types, each of which divides a 24-hour day into up to 4 segments, each
segment having a time category (A to F). This determines the current time category
at any moment.
Exception days, i.e.. days where the day type needs to differ from the week plan,
are set using the Month plan.
To change a day type :
1. From the Administration menu, select Automatic Route Selection and then
Time Analysis.
2. Select Time Map and enter the map number (1 to 4).
3. Select Day Type and enter the day type number (1 to 6).
4. To change the day type's name select Name and enter a name of up to 8
characters.
5. To clear the current settings select Default.
6. Use the up and down cursor to select one of the time periods. The currently
selected period is shown by a => symbol.
6. To add a new time period (maximum 4 periods), select Add time period. Enter
the start time of the new period, this also becomes the end time of the currently
selected period. Then enter the category for the new period.
7. To remove the currently selected time period, select Remove time period.
8. To change the currently selected periods time category, select Time category
and enter the new category.
To change the generic week :
1. From the Administration menu, select Automatic Route Selection and then
Time Analysis.
2. Select Time Map and enter the map number.
3. Select generic Week Plan of day types.
4. Select a day and enter the day type number.
5. Repeat for each day.
Setting Up Time Maps - Page 55
Automatic Route Selection (ARS) - Page 55
38DHB0002UKDJ – Issue 3 (12/00)
Advertisement
Table of Contents
