Related Manuals for Avaya IX Room Systems XT Series
Summary of Contents for Avaya IX Room Systems XT Series
- Page 1 © 2019 Avaya Inc. All rights reserved. Release Notes for Avaya IX Room Systems XT Series Version 9.2.1.10 For Avaya XT7000 Series For Avaya XT5000/XT4x00/XTE240 Series Avaya Equinox® Solution 9.1.9 September 2019...
- Page 2 Avaya Inc. or its agents. http://support.avaya.com Avaya Inc. reserves the right to revise this publication and make changes without obligation to notify any person of © 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
-
Page 3: Table Of Contents
© 2019 Avaya Inc. All rights reserved Table of Contents Avaya XT Series Highlights ....................4 Supported Languages ............................4 Web Interface Management ..........................4 Advanced Settings Menu ............................ 5 What’s New ..........................6 Avaya IX Tracking Camera TC220 ........................6 Setup Wizard Enhancements .......................... -
Page 4: Avaya Xt Series Highlights
© 2019 Avaya Inc. All rights reserved Avaya XT Series Highlights Avaya offers a complete range of advanced HD video conferencing room systems, stand alone or part of Avaya Equinox® Solution. Our full range of dedicated Avaya IX Room System video conferencing endpoints lets you experience exceptional video conferencing in any environment. -
Page 5: Advanced Settings Menu
© 2019 Avaya Inc. All rights reserved Save Settings in the Web Interface Advanced Settings Menu To enable Advanced Settings in the endpoint’s Main menu (Graphical User Interface, GUI), set GUI] > C > G > S ONFIGURE ENERAL DVANCED... -
Page 6: What's New
(or speakers) position, and thanks to the dual cameras it handles fluidly the transition from one view to the other. Tracking Camera Setup and Placement The Avaya TC220 Tracking Camera (1) must be connected to an XT Series Codec Unit as main camera, as described below. Important: •... - Page 7 © 2019 Avaya Inc. All rights reserved • Turn on the XT Series Codec. Please note: the camera placement must be at 1.4-1.8 meters height from the floor, while the suggested placement respect to the room table is as depicted below.
- Page 8 © 2019 Avaya Inc. All rights reserved Camera Configuration in the Codec The camera is automatically recognized when properly connected to the codec with the VISCA and HD cables as explained above. In any case, you can verify the camera configuration as follows: •...
-
Page 9: Setup Wizard Enhancements
Setup Wizard Enhancements When a new Avaya XT Series endpoint is installed, a quick setup wizard is displayed to manually configure some needed parameters (for instance GK address/E.164 or SIP Server address with credentials), in addition to other user preferences like displayed endpoint name and UX language. - Page 10 (via DNS Services) in your company. In this case you will be required to enter your personal credentials, or the phone number (extension) and password assigned to your video endpoint (same as an Avaya phone/Equinox Client). In this case, the endpoint will receive from a network server the information for SIP configuration and other preferences.
- Page 11 © 2019 Avaya Inc. All rights reserved Easy to Start – Auto-Configuration for Equinox Endpoints When the endpoint is part of an Avaya Equinox Deployment supporting auto-configuration via DNS service discovery, it can be easily auto-configured as a SIP video endpoint.
- Page 12 © 2019 Avaya Inc. All rights reserved Easy to Start Sequence • According to what is configured in the chosen environment you can be asked for your personal credentials (username/password) or for a phone-like SIP extension and password. What’s New | 12...
- Page 13 IT Administrator using Avaya Equinox® Management available as part of Equinox Solution 9.0.0 or higher. When using an Avaya IX video endpoint in a company where Avaya Equinox® Management is available, the administrator can now enable the Auto-Provisioning feature in the Avaya Equinox®...
- Page 14 © 2019 Avaya Inc. All rights reserved Avaya Equinox® Management with Auto-Provisioning Server Code In this way the administrator can easily configure a provisioning profile for any Avaya IX endpoint even before it is installed. No manual configuration is required on the endpoint for common parameters.
- Page 15 © 2019 Avaya Inc. All rights reserved Pre-provisioned Endpoint's Service Code Once they are added, Pre-provisioned endpoints are marked with a blue "clock" icon in the Avaya Equinox® Management list. This icon means that a profile is ready to be applied to an endpoint with a certain Service Code, but the endpoint did not yet connect to receive the provisioning profile.
- Page 16 This way, an IT administrator can plug all the endpoints in all the company conferencing rooms, just inserting the same post provisioning code; then set a mnemonic name for the endpoint and configure it later in Avaya Equinox® Management, where it will be displayed with a red clock icon near the name.
-
Page 17: Enhancements
(only the first 5 digits are needed). Just press “Next” in the initial wizard to have you’re the endpoint configured again with the same Avaya Equinox® Management. [Q]How can I associate my endpoint to a different Management Server with auto provisioning? [A]Ask your administrator to remove your endpoint from the Management Server and to add it to a new Management Server. -
Page 18: Control Api Extension (At Commands)
© 2019 Avaya Inc. All rights reserved - TLS, the system will try TLS -> TCP -> UDP; - TCP, the system will try TCP -> UDP - UDP, the system will try only UDP • In this way, the system will make DNS resolution to find the IP addresses related to the transport protocol used. -
Page 19: Software Upgrade & Downgrade
This section explains how to upgrade or downgrade XT Series software. Signed Software Packages Since release 9.0, XT Series software packages are signed by an Avaya Certificate Root Authority recognized by the XT Series. Only verified signed software packages will be accepted by XT Series once upgraded to this release. -
Page 20: How To Upgrade Xt Series To 9.X Releases
USB key and insert it into the upper USB socket. Important • Since version 9.2 is a Major Release for Avaya XT Series, a new license might be required for this upgrade if the endpoint is not under Maintenance Contract. Release Notes for Avaya XT Series... -
Page 21: Downgrading From This Release
Codec Unit and Remote Control to use a different code in the range [1...96]. (See Remote Control Shortcuts). Downgrading from this Release Downgrading to earlier releases could be unsupported by some Avaya XT Series products or in some conditions. In particular: In 9.x standard mode, you need to disable “Verify signature”... -
Page 22: Integrating With Other Components
© 2019 Avaya Inc. All rights reserved Integrating with Other Components Avaya Equinox® Solution includes several new components, but XT Series supports also ® components of the previous Avaya Scopia Solutions. Table 3: Solution Compatibility Current Solution Component Name Previous Solution Component Name Version Avaya Equinox®... -
Page 23: Resolved Issues
© 2019 Avaya Inc. All rights reserved Resolved Issues Version 9.2.1.10 of the Avaya XT Series includes resolved issues from previous GA version 9.2.0.215. Table 4: Resolved Issues Release Case Number/ Description of Issue Ticket ID Parsing of Bluejeans invitations. -
Page 24: Known Issues
Avaya performs effective testing of each software version. Patch software may be available to fix known issues of this software version. Please contact Avaya’s Customer Support Service for further information. This section details the list of known issues for this version. Issues are common to Avaya XT Series. Table 5:... - Page 25 © 2019 Avaya Inc. All rights reserved The camera does not turn on XT4300 the standby led when the codec unit is in power off Changing camera driver mode from automatic to manual (or the reverse) or changing the camera cascade setup requires following a specific procedure: see below.
- Page 26 © 2019 Avaya Inc. All rights reserved Audio transmission/reception could be choppy when using RVXT5000-615 Connect USB headset to lower USB port. USB headset connected to upper USB port. Sometimes the system is turned on, but the camera image is not...
- Page 27 © 2019 Avaya Inc. All rights reserved LifeSize Express LS_EX1_3.0.7 (2) produces corrupted audio in SIP Update LifeSize Express to latest version. As a calls with audio coding based on temporary alternative, disable G.722.1 from the QC#5567 G.722.1 Annex C, 48 kHz.
- Page 28 © 2019 Avaya Inc. All rights reserved terminal, the arrows in FECC page are not displayed after "Control Far" selecting. XT cannot send or receive presentation if there is only one QC#22715 XT Desktop Client in the conference and that Client does not have a webcam.
- Page 29 © 2019 Avaya Inc. All rights reserved To execute commands when using a telnet connection to port QC#18671 60123, press 'Enter' twice after each command. The XT GUI displays the un- correct network information when detaching and attaching QC#26262 the cable very quickly while using an old Aethra DHCP server.
- Page 30 © 2019 Avaya Inc. All rights reserved Detected XTs automatically wake up from standby mode to display on their screen the title bar with their name and IP address. The automatic pairing (by sound) is possible only in quiet meeting rooms or offices where: •...
- Page 31 © 2019 Avaya Inc. All rights reserved SNMP default community Change default SNMP community names or disable RVXT5000-1243 names are easily guessable SNMP RVXT5000-1244 SNMPv1 is not secure SNMP is disabled by default to enhance security Manual Presence Status is forced to "Busy"...
- Page 32 © 2019 Avaya Inc. All rights reserved XT cannot connect to Check that the DNS address assigned by DHCP is Management through cloud in valid. See Auto-provisioning FAQ initial wizard XT Auto-Provisioning Service may be interrupted, including for maintenance, repairs, upgrades, or equipment or network failures.
-
Page 33: Common Remote-Control Shortcuts
PTZ camera. • When entering the meeting ID for a videoconference hosted by an Avaya Equinox/Scopia MCU, use the * digit to delete an incorrect digit (as indicated on the MCU prompt). Use * Key to Cancel a Meeting ID •... - Page 34 GUI Configure > General > Remote Control Code or in the Web > Basic Settings > General > Remote Control Code. − Codes 97, 98, 99 are reserved to control an Avaya XT Series XT Deluxe Camera and cannot be used to control the Codec Unit. •...
- Page 35 Remote-Control Unit must match the setting configured in the GUI Configure > General > Remote Control Code or in the Web > Basic Settings > General > Remote Control Code. Codes 97, 98, 99 are reserved to control an Avaya XT Series Deluxe Camera and cannot be used to control the Codec Unit.
- Page 36 © 2019 Avaya Inc. All rights reserved Caution • Do not unplug or power off the system to switch off. • Press and hold the 'on/off/monitor' key on the Remote Control (top-right key) to switch off the system. XT PC Control Keyboard Shortcuts When using XT PC Control to interact with your XTE using your computer’s keyboard and mouse,...
-
Page 37: Avaya Policy For Gdpr
– to help gain informed consent from an individual prior to collecting their data. Avaya’s products will document what data they collect; and the mechanisms to be used to handle Avaya products include mechanisms that assist in restricting access to data as well as tools and processes that enable customers to access and manipulate collected data. -
Page 38: Additional References
• For more information about integrating XT Endpoints in with Avaya Aura see also https://downloads.avaya.com/css/P8/documents/100180521 • For more information about the complete set of products offered in the Avaya Equinox Solution, http://www.avaya.com • See also Finding Customer Documentation •... - Page 39 © 2019 Avaya Inc. All rights reserved 4. Select Avaya IX CU360 and Avaya XT from the list of products. 5. View the list of associated references. 6. Click to access online documentation. Finding Customer Documentation on support.avaya.com 1. Click https://support.avaya.com/...
- Page 40 © 2019 Avaya Inc. All rights reserved 4. From the Choose Release drop-down, select a release. 5. If necessary, select a Content Type. 7. View the list of associated documents. 8. Click to view or download the associated document (pdf).
-
Page 41: Copyright, Licensing And Credits
Third Party Open Source License Copyright and Credits info and Commercial License Agreement for Avaya XT Series Products are available at http://support.avaya.com/Copyright • Avaya XT Series devices include AAC-ELD technologies licensed by Fraunhofer IIS; see http://www.iis.fraunhofer.de/amm Release Notes for Avaya XT Series Copyright, Licensing and Credits | 41...