Advertisement
Quick Links
IP Telephony
Avaya Distributed Office i40
Contact Centers
Mobility
Installation Quick Start
Services
03-602288
Issue 2
May 2008
This document contains the information that you need to start using
your Avaya Distributed Office in the shortest possible time.
1.What to check
2.Mount
3.Ground
4.Connect
5.Power up
6.Configure.
Congratulations!
information on how to leverage the system, see the Avaya Distributed
Office Document Map.
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or
DRAFT - May 12, 2008 - 8:58 AM
before you install your Avaya Distributed Office.
your Avaya Distributed Office.
your Avaya Distributed Office.
your Avaya Distributed Office to your telephones,
computers, and network. See the Installation Poster.
Connect your computer to the Services port on the i40, using an
Ethernet cable.
your Avaya Distributed Office.
- The PWR LED and the CPU LED on the front panel illuminate to
indicate that the installation is successful.
Point your Web browser to
You are now ready to use your i40. For more
https://192.11.13.6.
Avaya policy.
Advertisement
Related Manuals for Avaya Distributed Office i40
Summary of Contents for Avaya Distributed Office i40
- Page 1 You are now ready to use your i40. For more information on how to leverage the system, see the Avaya Distributed Office Document Map. Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy. DRAFT - May 12, 2008 - 8:58 AM...
- Page 2 Internet Explorer 6.0 or Mozilla Firefox 1.5 or higher. Unpack The Avaya Distributed Office i40 is shipped with the following items. If any items are missing or damaged, Jumper for contact your supplier. Retain the packaging in case NVRAM init.
- Page 3 2. Turn the i40 upside down. 2 Attach the mounting bracket with the cable guides to the front of the chassis. - Ensure the base of the i40 is clean. Rack mounting 3. Peel the feet off the backing sheet. 1.
- Page 4 4. Verify that the screw holes are aligned with the General grounding requirements positions of the holes in the rack. For customer-installed equipment, the field-installed green/yellow conductor referred to as the 5. Insert two additional mounting screws on each side.
- Page 5 Connect in the riser closet and to the cabinet single-point Connect your Avaya Distributed Office to your ground terminal. Approved floor grounds may telephones, computers, and network. Refer to the include the following: Building steel.
- Page 6 Power up • The Distributed Office Local Manager application starts. This may take several minutes. 1. If you received a USB flash disk, insert it into the USB port on the front of the i40. L I N L I N •...
- Page 7 • The main menu is displayed in the working pane on Initial Setup Assistant Home Screen. the right side of the main screen. The entries on the The Initial Setup Assistant applies to Distributed main menu are shortcuts for the most frequently Office i40 solutions that require complete used functions.
- Page 8 Avaya Support Notices for Software Documentation, 03-600758, and Avaya Support Notices for Hardware Documentation, 03-600759. These documents can be accessed on the Avaya Support site, support.avaya.com. On the Web site, search for the document number in the Search box. COMMUNICATIONS AT THE HEART OF BUSINESS DO0851 Rev.A...