Table of Contents
Advertisement
Page 52 - Storing Authorisation Codes
Storing Authorisation Codes
Page 52 - Automatic Route Selection (ARS)
38DHB0002UKDJ – Issue 3 (12/00)
ARS digit translations can specify the insertion of an authorisation code. When this
occurs, the translation inserts the code assigned to the user dialling. The INDeX
stores up to 10 authorisation codes for use by users, although each user can only
use one of those codes.
To store an authorisation code :
1. From the Administration menu, select PSTN Access and then Authorisation
code.
2. Select one of the ten stores and enter the authorisation code (up to 16 digits).
The INDeX only displays the length of the code, not the actual digits.
3. To delete an authorisation code, select the store number and enter ↵.
To assign an authorisation code to a user :
1. From the Administration menu, select User and enter the user's directory
number.
2. Select Auth.code number and select the code to use (1 to 10).
Automatic Route Selection (ARS)
Programming Manual
INDeX 9.1
Advertisement
Table of Contents
