Table of Contents
Advertisement
Linecard Management (NA INDeX 30)
Linecard Management (NA INDeX 30)
Viewing Cassettes & Cassette Channels
Inserting Cassettes
Cassette Set up
Programming Manual
INDeX 9.1
The Linecard information menu shows information about all the cassettes in the
INDeX, their types and their current status.
To view cassettes :
1. From the Administration menu, select Linecard Information.
2. The screen displays details of the cassette in each cabinet slot and each
cassette's status.
3. Select Linecard and enter the card address.
4. To select another cassette use the left and right cursor keys or Select new
target.
5. The screen displays the cassette type and software level plus a description.
– To change the description, select Description and enter a name of up to 30
characters.
6. To view the individual details of channels on the cassette, select Channels.
The screen displays the channel type, address, directory number and
identification of each allocated channel.
A new cassette can be inserted into any unused free slot provided if does not
conflict with any of the conditions below. If the slot has been previously used for
another type of cassette, that cassette will need to be de-allocated (refer to the
INDeX Installation & Maintenance Manual).
The INDeX automatically allocates trunk or terminal directory numbers for all the
cassette circuits (except PRI circuits - see page 21).
Slot/Cabinet Limitations :
– CPU 100 only supports use of slot 1, 2, 3 and 8 in one cabinet.
– CPU 100/200 INDeXs do not support additional cabinets.
– CPU 400 INDeXs only support 1 expansion cabinets.
– CPU 800 INDeXs support up to 3 expansion cabinets.
– CPU 1000 INDeXs support up to 4 expansion cabinets.
– Cabinets with a PSU 4 fitted can only use slots 1, 2, 3 and 8 (slot 8 being
reserved for an Expansion Link Cassette (ELC) or CPU Cassette).
The top line of the log in screen indicates the type of CPU Cassette installed in the
INDeX. This screen also displays the remaining capacity of INDeX ports, directory
numbers and group cells (members).
To set up a cassette :
1. From the Administration menu, select Linecard information.
2. Select Linecard and enter the card address.
3. Select Set up. The screen displays the set up options for that type of cassette.
Linecard Management (NA INDeX 30) - Page 110
38DHB0002UKDJ – Issue 3 (12/00)
Page 110
Advertisement
Table of Contents
