Locking Slot Usage; On & Off-Lining Devices; Resetting Devices; Mimicking Cassettes - Avaya INDeX 9.1 Programming Manual

Hide thumbs Also See for INDeX 9.1:
Table of Contents

Advertisement

Linecard Management (NA INDeX 30)

Locking Slot Usage

On & Off-Lining Devices

Resetting Devices

Mimicking Cassettes

Programming Manual
INDeX 9.1
Locking a cassette slot stops it being used for any other type and capacity of
cassette than that already present. If a different cassette is inserted, it is not
recognised and the cassette's red LED flashes. When a cassette is inserted into an
unused slot, the slot is automatically locked after channel allocation.
To lock/unlock the cassette type :
1. From the Administration menu, select Linecard information.
2. Select Linecard and enter the card address.
3. Select Locked to lock or unlock the cassette.
As well as shutting down cassettes, you can off-line individual devices within
cassettes. Whilst off-line the device returns number unobtainable to calls.
You can also de-allocate individual devices. This remove the devices directory
numbers and settings from the database. If de-allocating a cassette circuit, to
reallocate the device the cassette must be shutdown, unlocked and then reinserted.
To on line or off line a device :
1. From the Administration menu, select Maintenance.
2. Select either Online or Off device and enter the device address or directory
number.
To de-allocate a device :
1. From the Administration menu, select Maintenance.
2. Select Deallocate device and enter the device's address or directory number.
To reset a device :
1. From the Administration menu, select Maintenance.
2. Select Reset and enter the device's address or directory number.
The INDeX allows you to pre-allocate database entries for cassettes in slots without
actually having to install them. You can use these to program up the database in
advance of full equipment installation or for download and upload to another INDeX.
To install a linecard :
1. From the Administration menu, select Maintenance.
2. Select Card Installation.
3. Enter the slot into which you want to install a non-existent cassette.
4. Select the cassette type and enter the number of channels.
Locking Slot Usage - Page 111
Linecard Management (NA INDeX 30) - Page 111
38DHB0002UKDJ – Issue 3 (12/00)

Advertisement

Table of Contents
loading

Table of Contents