Index 30 Channel Set-Up; Next Trunk And Next Station Numbers; Hardware Interfaces - Avaya INDeX 9.1 Programming Manual

INDeX 30 Channel Set-up

INDeX 30 Channel Set-up

Next Trunk and Next Station numbers

Hardware Interfaces

Programming Manual
INDeX 9.1
When new trunk and terminals are allocated to the INDeX, they are normally
automatically assigned directory numbers. The Next station number and Next
trunk number settings determine what those numbers will be.
The Next station number value can be left blank to disable automatic directory
numbering of new terminals. In that case a directory number must be manually
assigned to the terminal (see page 61).
To set the Next Station/trunk/group numbers :
1. From the Administration menu, select System and then Installation.
2. Select Next station number or Next trunk number and enter the number
required. Note that the numbers displayed change automatically as numbers
are allocated.
The INDeX 30 supports 16 DSLC ports, 8 ALOG ports and 4 BRI ports.
For details on setting up BRI circuits, refer to page 22.
For details on setting up ALOG POTS, see page 24.
INDeX 30 Channel Set-up - Page 25
38DHB0002UKDJ – Issue 3 (12/00)
Page 25