Op Video Loss Option; Input Termination Option; Noise Reduction Option - TANDBERG evolution 5000 E5710 Instruction Manual

Table 4.25: Background Colour Options
White
Black

OP Video Loss Option

This option gives the choice of what is displayed on the television screen in
the event of losing video input. To access the OP Video Loss option, press
the OP Video Loss softkey from the Video Source Menu.
OP Video Loss
Output on Video Loss :
Table 4.26: OP Video Loss Options
Selected Option
Freeze Frame
Black
Bars & Red
Freeze + Ident
Black + Ident
Bars & Red + Ident

Input Termination Option

To access the Input Termination option, press the Input Termination
softkey from the Video Source Menu. This enables the termination of the
analogue video input to be switched On or Off.

Noise Reduction Option

This option enables the noise reduction feature to be switched on (at
different levels) or off. The feature can be used when the incoming picture
material is corrupted by high frequency noise (such as white noise). When
noise reduction is enabled, the Encoder applies sophisticated edge
preserving filters on the incoming material and removes the noise which
can reduce the encoding difficulty considerably.
To access the Noise Reduction option, press the Noise Reduction softkey
from the Video Source Menu.
The three levels of noise reduction are in increasing order of noise
reduction capability. They are independent of video content. All three
settings are noise-level adaptive, i.e. it is not necessary to change the
setting for different noise levels.
2
Noise reduction is only available when software option M2/ESO2/NR is purchased.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Available Options
Blue Magenta Yellow
Red Orange Grey
Freeze Frame
Update using softkeys
Description
The last video frame received is encoded if the video input is lost.
A black screen is encoded if the video input is lost.
Bars and red test pattern is encoded if the video input is lost.
The last video frame received is encoded if the video input is lost. Text message is superimposed.
A black screen is encoded if the video input is lost. Text message is superimposed.
Bars and red test pattern is encoded if the video input is lost. Text message is superimposed.
Green Pink
Cyan
Enter l
Quit l
2
Operating the Equipment Locally
+
—
Page 4-35