Service Id Option; Transport Stream Id Option - TANDBERG evolution 5000 E5710 Instruction Manual

Network Id
¬ Left
® Right
l Ins
l Del
Table 4.6: Network Id Options
Selected Option
Min:
Max:
Step Size: 1

Service Id Option

This option ties the SDT to the PMT and is the same as the Program
Number in ATSC. To access the Service Id option, press the Service Id
softkey in the Service Info Menu. This enables the Service Identity to be
specified. Use the + and – softkeys to scroll through the options and then
press the Enter softkey after selecting one of them. The information is
included in the PAT, PMT, SDT, EIT and NIT.
NOTE...
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Service Id
¬ Left
® Right
l Ins
l Del
Table 4.7: Service Id Options
Selected Option
Min:
Max:
Step Size:

Transport Stream Id Option

To access the Transport Stream Id option, press the Transport Stream
Id softkey in the Service Info Menu. This enables the Transport Stream
Identity to be specified. Use the + and – softkeys to scroll through the
options and then press the Enter softkey after selecting one of them. The
information is included in the PAT, SDT and NIT.
NOTE...
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Network Id :
`65535 (FFFFh)'
Update using softkeys
Description
0 Network identity number.
65535
Service Id :
`1 (0001h)'
Update using softkeys
Description
0 Network identity number.
65535
1
Operating the Equipment Locally
+
—
Enter l
Quit l
+
—
Enter l
Quit l
Page 4-19