Frame Rate Option; Video Locked Option - TANDBERG evolution 5000 E5710 Instruction Manual

Serial Digital Video In
Analogue Video
Figure 4.11: Setting up the Video Input

Frame Rate Option

NOTE...
The frame rate is only shown when the video input is Serial Digital, any Test Pattern or Off.
To access the Frame Rate option, press the Frame Rate softkey from the
Video Source Menu.
Frame Rate
Frame Rate :
Table 4.23: Frame Rate Options
Selected Option
29.97 Hz
25 Hz

Video Locked Option

This option indicates whether the video is locked. It is for status only and
cannot be changed.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Set up the Video in this sequence
Setup/Video Source
Source Option
SDI
COMP VIDEO
Test
Pattern
29.97 Hz
Update using softkeys
Description
Used in 525 lines (NTSC-M + PAL-M).
Used in 625 lines (PAL).
Operating the Equipment Locally
Setup/Video/Encoder Setup/Video/Encoder
Profile/Level Option Compression Mode
Encoding
4:2:0 (MP@ML)
4:2:2 (422P@ML)
(option)
E57xx Encoder
+
—
Enter l
Quit l
Encoding
Standard
Low Delay
Very Low Delay
Mega Low Delay
Seamless 1-6
Page 4-33