For Text Or Numeric Entry; A(Udio)/V(Ideo) Menu (E5710); Establishing Local Control (E5720); Input Monitor - TANDBERG evolution 5000 E5710 Instruction Manual

For Text or Numeric Entry

The character list for text entry contains the following characters:
space ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
0123456789/+-=.,:;_!$%^&*(){}[]@'#<>?|
For numeric entry only 0-9 are displayed.
·
DOWN
·
UP
·
RIGHT
·
LEFT
·
ENTER
·
CANCEL
·
Hold ENTER for two seconds to insert space for a character or digit
·
Hold CANCEL for two seconds to delete a space, character or digit
NOTE...
If the number being entered can be negative then a minus sign can be inserted by pressing LEFT
when the cursor is on the left-most digit. This can then be toggled between plus and minus by pressing
the UP/DOWN keys.
4.3.4

A(udio)/V(ideo) Menu (E5710)

The A/V Menu is designed to give the user fast access to basic audio and
video input settings, and operates in a slightly different way to other
menus.
The menu gives a list of video and audio settings and the audio input
levels. Any of the settings can be changed by pressing ENTER to cycle
through the options. Each time ENTER is pressed the new setting is
updated and actioned immediately by the Encoder.
Only those video input selections compatible with the currently selected
frame rate can be chosen from this menu. For example, if the current
selection is PAL-B/G/H/I (frame rate 25 Hz) then any format except PAL-M
or NTSC-M can be selected (29.97 Hz only).
4.4

Establishing Local Control (E5720)

4.4.1

Input Monitor

At power-on the Encoder runs through a boot sequence (boot time without
any option modules is approximately 45 seconds). An initial Input Monitor
screen is shown. This displays a picture of the currently selected video
source, the service name of the video channel being encoded, the audio A
and B channels in the form of bargraphs, and the multiplexer and video
bit-rates.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Scrolls down through character list
Scrolls up through character list
Moves cursor one character right
Moves cursor one character left
Accepts new setting
Leaves setting unchanged
Operating the Equipment Locally
Page 4-7