Auto Detect Vitc Option; Vbi Line 'N' Option - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally

Auto Detect VITC Option

To access the Auto Detect VITC option, press the Auto Detect VITC
softkey in the VBI Menu. This enables the Vertical Interval Time Code
(VITC) to be automatically detected. The option can be turned On or Off.

VBI Line 'n' Option

To access the VBI - Line 'n' option, press the VBI - Line 'n' softkey in the
VBI Menu (the line number shown changes according to the line option
selected). This enables extraction of VBI data from the selected line, and
specifies the type of VBI data that the line contains.
Table 4.40: VBI - Line 'n' Options
Option
Frame Rate = 29.97 Hz
Off
Vertical Interval Time Code
Video Index
Closed Caption
Neilsen AMOL 1
Neilsen AMOL 11
Frame Rate = 25 Hz
Off
Vertical Interval Time Code
Video Index
Teletext System B
(World System Teletext)
Inverted Teletext
Wide Screen Signalling
Closed Caption
Video Programming System
Page 4-48
Description
VBI data is not extracted from the line.
VITC data extracted from the line.
The setting cannot be selected on this screen, but is set by setting the Closed Caption
option to On. It indicates that closed captioning data is extracted from the line. Setting Line
21 back to Off or VITC resets the Closed Caption option back to Off.
Neilsen AMOL 1 data is extracted from the line.
Neilsen AMOL 11 data is extracted from the line.
VBI data is not extracted from the line.
VITC data extracted from the line.
Aspect ratio will be affected (see Table 4.34).
Teletext System B data extracted from the line.
Inverted Teletext is extracted from the line.
The setting cannot be selected on this screen, but is set by setting the WSS (Line 23) option
to On. It indicates that WSS data is extracted from the line. Setting Line 23 back to Off,
VITC or Teletext System B resets the WSS (Line 23) option back to Off.
Closed Caption data is extracted from the line.
The setting cannot be selected on this screen, but is set by setting the VPS (Line 16) option
to On. It indicates that VPS data is extracted from the line. Setting Line 16 back to Off, VITC
or Teletext System B resets the VPS (Line 16) option back to Off.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1