4.11.2 Output Format Option; 4.11.3 Delivery Descriptor Menu; 4.11.4 Descriptor Type Option; 4.11.5 Descriptor Type = Terrestrial - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally

4.11.2 Output Format Option

To access the Output Format option, press the Output Format softkey in
the Output Menu. The output format of the Encoder cannot be changed and
is set to ASI.

4.11.3 Delivery Descriptor Menu

To access the Delivery Descriptor Menu, press the Delivery
Descriptor softkey in the Output Menu. The screens in this menu vary
according to the Descriptor Type selected.

4.11.4 Descriptor Type Option

To access the Descriptor Type option, press the Descriptor Type softkey
in the Delivery Descriptor Menu. This enables the descriptor type to be
specified.
Descriptor Type
Descriptor Type :
Table 4.62: Descriptor Type Options
Selected Option
Satellite
Terrestrial
None
Cable

4.11.5 Descriptor Type = Terrestrial

Band Plan Option

To access the Band Plan option, press the Band Plan softkey in the
Delivery Descriptor Menu.
Once a country has been selected then the required channel should be
selected in the Channel option. Each channel number corresponds to a
particular frequency (see Annex F, Band Plans).
Band Plan
Band Plan :
Page 4-72
Terrestrial
Update using softkeys
Description
Descriptor type set to Satellite.
Descriptor type set to Terrestrial.
Descriptor type set to Cable.
Australia
Update using softkeys
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
+
—
Enter l
Quit l
Comments
The type of delivery descriptor
selected affects the remaining
options shown on the Delivery
Descriptor Menu.
+
—
Enter l
Quit l
ST.TM.E10074.1