Upgrade Encoder Option; Software Release Option; Fan Control Option; Advanced Menu - TANDBERG evolution 5000 E5710 Instruction Manual

Upgrade Encoder Option

There are a number of features which are not enabled by default. Refer to
Chapter 3, Options and Upgrades, Table 3.1 for details.
To enable these features, access the Upgrade Encoder option and press
the Upgrade Encoder softkey in the General Menu. This shows the serial
number of the box, which is in the range of 0 to 65535. Send this number
to TANDBERG Customer Services and they will return a software licence
key to enter via the front panel to enable the features.
NOTE...
These software options must be purchased before the software licence key is sent.
Upgrade Encoder
¬ Left
® Right
l Ins
l Del

Software Release Option

The software release is shown in the General Menu. It cannot be changed.

Fan Control Option

To access the Fan Control option, press the Fan Control softkey in the
General Menu. Refer to Annex B, Technical Specification, Table B.19 for
more information about the temperatures at which fans activate and
deactivate.
Fan Control
Fan Control :
Table 4.18: Fan Control Options
Selected Option
Auto (Temp. control)
On
4.7.6

Advanced Menu

Overview

The Advanced Menu is selected from the System Menu by pressing the
Advanced softkey. This menu provides options for the advanced
parameters of the Encoder. See Figure 4.9 for the Advanced Menu
structure.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Enter Upgrade Code (23328) :
"
Update using softkeys
Auto (Temp. control)
Update using softkeys
Description
The fans are activated automatically when a defined
temperature is reached.
The fans are activated all the time.
Operating the Equipment Locally
+
—
Enter l
Quit l
+
—
Enter l
Quit l
Page 4-27