Impedance Option; Language Or Language Left/Right Option - TANDBERG evolution 5000 E5710 Instruction Manual

Operating the Equipment Locally
Table 4.48: Clip Level Options
Selected Option
12 dB
15 dB
18 dB

Impedance Option

To access the Impedance option, press the Impedance softkey in the
Audio A Menu. This screen enables the impedance of the audio input to be
set.
NOTES...
1. This option is only shown when the Coding Standard is MPEG Layer 2, Linear PCM or Dolby
Digital (AC-3).
2. This option is only displayed when the audio source is analogue.
Impedance
Audio Impedance :
Table 4.49: Impedance Options
Selected Option
600 ohms
20 kohms

Language or Language Left/Right Option

To access the Language option, press the Language softkey in the
Audio A Menu. This enables the language of the audio channel to be set.
To access the Language Left/Right option, press the Language
Left/Right softkey in the Audio A Menu. This enables the language of the
left and right audio channels to be set.
NOTE...
The Language Left/Right option is only shown when Coding Mode is set to Dual Mono.
Language
Audio Language :
Page 4-58
Description
12 dB audio clipping level.
15 dB is only available with PCB issue 4 and later (see Build Menu).
18 dB audio clipping level.
600 ohms
Update using softkeys
Description
Used in analogue mode.
English
Update using softkeys
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
+
—
Enter l
Quit l
+
—
Enter l
Quit l
ST.TM.E10074.1