Table of Contents
Advertisement
The Additional Audio option module comprises Assembly S12293 and Card
S11976. See Table 3.1 for the slots that it can be installed in.
Audio In Connector
Connect the audio cable to the AUDIO IN
connector. The 15-way, D-type male connector
is used in different ways according to the audio
input and the encoding configuration selected.
The connector provides two stereo pairs. They may be independently
configured as either analogue or digital. The left channel is used to input
digital audio.
Table 3.4: Audio In Connector
Pin
Analogue
1
Left Channel A (+)
2
Not connected
3
Right Channel A (-)
4
Left Channel B (+)
5
Not connected
6
Right Channel B (-)
7
8
Not connected
NOTES...
1.
In analogue mode termination is either 20 kW or 600 W.
2.
In AES/EBU mode termination is 110 W (default).
When the Encoder is powered down the digital channel is selected with 110 W termination.
3.
4.
The digital audio input does not support SPDIF.
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1
Signal
Digital
AES/EBU (A) (+)
AES/EBU (B) (+)
AES/EBU
Reference (Signal)
To ensure EMC compliance, use the audio connector supplied with the Encoder.
Pin
Analogue
9
Left Channel A (-)
10
Right Channel A (+)
11
Not connected
12
Left Channel B (-)
13
Right Channel B (+)
14
Not connected
15
CAUTION...
Options and Upgrades
Signal
Digital
AES/EBU (A) (-)
AES/EBU (B) (-)
AES/EBU
Reference (Ground)
Page 3-7
Advertisement
Chapters
Table of Contents
