Embedded Audio (Via Sdi; Test Tones - TANDBERG evolution 5000 E5710 Instruction Manual

Technical Specification
Item
A-weighted
Unweighted
User Levels @ 1 kHz (0 to 50 dB)
+10 dB
-10 dB
-20 dB
-30 dB
-40 dB
-50 dB
Phase @ 0 dBs
40 Hz
100 Hz
315 Hz
1 kHz
6.3 kHz
10 kHz
15 kHz

Embedded Audio (Via SDI)

Audio embedded on the serial digital interface can also be extracted. Up to
four stereo pairs of audio can be extracted from the SDI. The Encoder can
extract two DIDs at once, giving four stereo pairs.
Table B.10: Embedded Audio Specification
Item
Serial Digital Interface
Safety status
Connector designation
Connector type
Input standard
B.2

Test Tones

Table B.11: Test Tones Specification
Item
Level
Frequency
Bit-rate
NOTE...
Clip Level refers to the head room above 0 dBu, prior to the audio being clipped.
Page B-8
Specification
70 dB
70 dB
K
±0.2 dB
±0.2 dB
±0.2 dB
±0.2 dB
±0.3 dB
0 to -2 dB
Z
±2°
±2°
±2°
±2°
±2°
±2°
±2°
Specification
SELV
SDI IN
BNC female connector
ITU-R RECMN BT.656-3
SMPTE 272M-A
Specification
0 dB at 18 dB clip level
1 kHz at 48 kHz sampling frequency
96 kbit/s
Instruction Manual: evolution 5000 E5710 and E5720 Encoder
ST.TM.E10074.1